Changes from version 22.5.8 to 22.5.9 (08-Apr-2004) John Coffman Boot Installer -------------- - Alter NT check for invalid volume ID -- no change on single disk systems. (device.c) - Make 'prompt' a word. (common.h, first.S) - Add 'bmp-retain' local & global option. (bsect.c, cfg.c, second.S) Retains bitmap after booting. - Add Makefile option "lilo-static:" -- must specifically make it. - Fix setting of "map==boot" for RAID installs. (bsect.c, raid.c) Boot Loader ----------- - Skip duplicate VolumeIDs in second stage, in case a disk has been added to the system. (volume.S) Utilities --------- - Update QuickInst to reflect absence of 'activate', using lilo -A Changes from version 22.5.7.2 to 22.5.8 (09-Oct-2003) John Coffman Boot Installer -------------- - Add "max-partitions=" to the "disk=" section to enable support for user-defined devices. (geometry.c) - Color range extended to 0-255 (from 0-15) for 256 color bitmaps. (bsect.c, edit.c, common.c) - Make VolumeID scan skip INACCESSIBLE drives (device.c) - Automatically skip ATARAID drives with "ataraid" keyword and mark all underlying drives INACCESSIBLE. (device.c, cfg.c) - REMOVE the above ATARAID stuff. - Add "static-BIOS-codes" to bypass VolumeID booting. (bsect.c, device.c) - Add test for setup > MAX_SETUPSECS. (boot.c) - Open '/proc/partitions' before 'chroot' with -r flag (lilo.c) Changes from version 22.5.7 to 22.5.7.2 (20-Aug-2003) John Coffman Boot Installer -------------- - Eliminate f2.S; combine all into first.S. (loader.S, Makefile) - Fix -I to work with "change automatic". (partition.c) - Correct warning message condition in pf_hard_disk_scan. (device.c) - Modify warning message condition: unknown video adapter. (bsect.c) - Fix problem with "devfs" in 'cache_scsi'. (device.c) (22.5.7.1) Changes from version 22.5.6 to 22.5.7 (10-Aug-2003) John Coffman Boot Installer -------------- - Int 13h, fn 08h/48h differing geometries depends on LBA32 & verbosity level (probe.c) - Bug fix for geo_query_dev uninited geo->device (geometry.c) - preload_dev_cache is now sensitive to devfs present (device.c) - Alter lookup_dev to not check for existence of device; just return the name if it is in the cache (device.c) - PROBE_VERSION==6 always report fn 48h parameters; print nicer output for "-T geom" switch (probe.c) - Account for drive mapping in volume.S so that multiple chain's will operate correctly on RAID1 installations. - Experiment: sort MAJOR_HPT370 (114) as (2) (device.c) - Raid install: suppress warning if 'mbr-only' or 'mbr' (raid.c) Boot Loader ----------- - First stage uses rewritten I/O routine & processed disk addresses (6 bytes); now enough space for VE call; no FF (f2.S, first.S) Utilities --------- - Update 'mkrescue' to dynamically determine the loopback device; makes it devfs-friendly (mkrescue 2.3) - mbr & mbr2 will pass lilo parameters through to destination (mbr.S) Changes from version 22.5.5 to 22.5.6 (29-Jun-2003) John Coffman Boot Loader ----------- - Strict limit on PARMLINE to 255 characters + NUL (second.S) - Move 'volume.S' and 'shs3.S' variables to .bss after PARMLINE. - Use DL from first stage on raid reads (volume.S) Boot Installer -------------- - Generate 'version' information to track changes (common.c) - Eliminate raid assigning all devices to the same device code (raid.c) Changes from version 22.5.4 to 22.5.5 (16-Jun-2003) John Coffman Boot Installer -------------- - Improve fetch() to avoid redundant reads on failure (probe.c) - Add 'el-torito-bootable-cd' switch (cfg.c, bsect.c) - Check for initial ramdisks too big to fit between 4M-15M (boot.c) - Enhanced '-A' (activate) works for extended part. (partition.c) - Separate PT check & S/N check in 'bios_dev' (probe.c) - Allow chain loader > 3 sectors (boot.c) - Attach -P switch to universal cfg_set() (lilo.c) - Check for active partition (part_verify, partition.c) Boot Loader ----------- - Terminate floppy emulation on boot from El Torito CD (second.S) - Complain of possible kernel overwrite if initrd loads below 4M Chain Loader ------------ - Merges second stage drive map with any existing drive map; then merges its own drive map (chain.S) Utilities --------- - Enhanced 'mbr.S' will look at extended partitions - Compensate in 'mbr.S' for AHA-2940 bios bug (ES:BX needed) Changes from version 22.5.3.1 to 22.5.4 (25-May-2003) John Coffman Boot Installer -------------- - Remove all references to FLAG_RAID_NOWRITE (lilo.h, raid.c) - Add flags to -I option: D (default), a (append) (identify.c) - Add warning about initial RAM disks too big for 15M (boot.c) - Check specifically for switches which take no args (lilo.c) - Sorted assignment of BIOS device codes if no BIOS data (device.c) - Fix serial number naming bug (device.c) Boot Loader ----------- - Remove all references to FLAG_RAID_NOWRITE (second.S) - Allow '-DSUSPEND=0xNN' to specify a primary partition, which, if active, indicates a virtual boot; for DELL suspend option (second.S) Utilities --------- - Get 'mkrescue' to use the -I 'D' and 'a' flags (mkrescue) - Add --iso option to 'mkrescue' (mkrescue 2.0) Changes from version 22.5.3 to 22.5.3.1 (12-May-2003) John Coffman Boot Installer -------------- - Update to fix Segmentation fault in "lilo -T geom" (probe.c) Changes from version 22.5.2 to 22.5.3 (10-May-2003) John Coffman Boot Installer -------------- - Update smart_cache to account for DEVFS irregularities (device.c) - Call smart_cache from lilo.c, not within preload_dev_cache (lilo.c) - Add FLAG_BD_OKAY to suppress the writing to the map file if previous BIOS data collection worked okay (bsect.c) Utilities --------- - Update mkrescue to 1.3 to suppress spruious messages with 22.5.2 due to smart_cache scan of hard disks (mkrescue), and add --size argument for making 1.2M floppy, instead of 1.44M floppy Changes from version 22.5.1 to 22.5.2 (01-May-2003) John Coffman Boot Installer -------------- - Compilation fix for lilo.c (printf macro, again) - Updates to handle reiser4. (geometry.c) - Smart device caching if "/proc/partitions" is present. (device.c) - '-M' switch creates a backup file subject to '-s' & '-S' (partition.c) - Fix "raid-extra-boot=" for devices outside of the raid set (bsect.c) Boot Loader ----------- - Fix calls to get number of hard disk devices (first.S & mbr.S) Changes from version 22.5 to 22.5.1 (28-Mar-2003) John Coffman Boot Installer -------------- - Put all backups and force-backups on the same footing. - Allow only 1 backup file per major/minor device code, in case a volume id is written, then the sector is backed up again. - Fix bug in 'do_table' error reporting "Not a device". (probe.c) - 'lilo -T video' will now check for Enable Screen Refresh bios bug. - Added 'boot-as=' as global and other= option; 'master-boot' now global option, too. (boot.c, chain.S) - Add additional parameter to 'raid-extra-boot=mbr'; like 'mbr-only' but writes boot record to RAID1 partition, too. - Set 'bios-passes-dl=DL_GOOD' on '-x none' or '-x auto' with no partitions other than primary. Issue warning message. (raid.c) - Fix problems when 'boot=' is omitted. (raid.c, bsect.c) Boot Loader ----------- - Protect DL against video BIOS clobbering it. - Load second stage at 0880:0000, unconditionally. It will move itself to where it wants to run. (first.S) - Verify DL device code passed from BIOS into first stage. Verify failure causes bypass of FLAG_MAP_ON_BOOT check. (first.S) - Reconfigure headers of first & second stages for string compare for verification that second stage is loaded. (first.S) - Update bios data check to collect boot DX & enable screen refresh registers for check for state of BIOS (PROBE_VERSION 5). - Allow "mem=#" and "mem=$" to pass to 2.5 kernels. (second.S) Utilities --------- - Incorporate protection for DX in master boot record. (mbr.S) Changes from version 22.4.1 to 22.5 (04-Mar-2003) John Coffman Boot Installer -------------- - Add timestamp to boot sector for this unique LILO installation; use the map creation time (bsect.c). - Allow 0 as a parameter to the '-A' switch, to indicate deactivation of all partitions (partition.c). - Meaning of '-w' flag expanded: '-w+' turns on warnings, even if configuration file says 'nowarn'. - Create 32-bit volume labels on all hard disks. - Mark boot sector if map file is on same disk as boot sector. - Backup options -s & -S may specify directory or filename template, in addition to existing filename. - Update bitmap editor to handle 256 color bitmap files. - For 'other=', add the flag 'master-boot' to indicate an OS which is required to boot from drive 0x80. - Check boot loader selected against video adapter; issue warnings. Boot Loader ----------- - Move two disk addresses (dflcmd, message/bitmap) to keytable area to diminish size of First Stage loader. - Fix RAID bug on writes to arrays with 3 or more active disks. - Boot by volume label, not BIOS device code. - If map file marked on same vol as boot sector, use boot BIOS device code to access secondary loader in map file (UNIFY compile option is mandatory). - RAID1 uses volume labels for lock, fallback, cmdline rewrites. - Update 'bmp' loader to allow 640x480x256 color bitmaps on adapters which support VESA mode 0x101. - Fix the nagging Passed Boot Command line *Interrupt* bug. - Extend timestamp to the second stage loader (mapstamp). Chain Loader ------------ - Chain loader will pass command line to relocated boot record. - Add support to dynamically add drive swapping for 'master-boot' flag: swap boot BIOS device code with 0x80 (or 0). Utilities --------- - Master Boot Record (mbr.S) exits to BIOS on error (int 0x18). Changes from version 22.4 to 22.4.1 (27-Jan-2003) John Coffman Boot Loader ----------- - Fix compilation typos Changes from version 22.3.4 to 22.4 (24-Jan-2003) John Coffman Boot Installer -------------- - Add keywords vmdefault, vmdisable, vmwarn. - Print volume serial numbers with "-T geom". Boot Loader ----------- - Add support for keywords vmdefault, vmdisable, vmwarn. - First stage loader exits to BIOS on error (int 0x18). Chain Loader ------------ - Change pause requiring user input to delay (in debugging mode). Changes from version 22.3.3 to 22.3.4 (01-Nov-2002) John Coffman Boot Installer -------------- - Remove exit() call from unbootable() (bsect.c) so die() displays error message. - Fix boot errors when boot record relocation occurs in a RAID1 installation. (bsect.c) - Fix Failsafe partition table overwrite check. (bsect.c) Boot Loader ----------- - Recognize command line "mem=@" for the 2.4 kernels. Changes from version 22.3.2 to 22.3.3 (30-Aug-2002) John Coffman Boot Installer -------------- - Suppress warning message about .shs file older than config file, if '-p' is already specified. - Change FLAG_SAVE to really be complement of FLAG_RAID_xxx. - Add EVMS patches from Kevin Corry Enterprise Volume Management Project - get UNSAFE to work on hard disks, too (geometry.c) with "disk=/dev/hdXX bios=0x8X inaccessible" - allow BIOS_MAX_HEADS to be 256; 255 is the REAL max, but there are some oddball BIOS's which allow 256 Changes from version 22.3.1 to 22.3.2 (11-Jul-2002) John Coffman Utilities --------- - Fix bug in 'mbr.S' to correctly use 'lba32' on large disks Changes from version 22.3 to 22.3.1 (16-Jun-2002) John Coffman Boot Installer -------------- - Correct reporting of command line segment (probe.c). - Correct check for Bitmap table image_menu_space exceeded. - Output actual geometry when Kernel/BIOS differ, or int 13h, functions 08h/48h differ (probe.c). - 'bios_dev' changes to cope with kernel 2.4.18 returning different disk geometry than previous kernels. Use int 13h/fn 8h disk geometry, where possible (probe.c). - Add "k" option to -I flag to support mkrescue 1.2. Boot Loader ----------- - Bug fix for FF in text in 'say:' routine (save/restore BX). Utilities --------- - Create 'pseudo.b' -- a pseudo kernel header for loading arbitrary binaries at 1000:0000. See 'README.pseudo' for details. - Change "make floppy" to create both 1.5.4 and 2.1.1 diagnostics. - 'mkrescue' now handles keytable translations with --keymap (1.2). Changes from version 22.2 to 22.3 (19-May-2002) John Coffman Utilities --------- - Update 'mkrescue' to work with 22.3 - Integate bitmap file header Editor with 'lilo -E' - Upgrade boot diagnostic to check for memory area overlap in int 15h, function E820h, bios call, and to check for 24-bit moves to high memory, when a 32-bit address is used. Boot Installer -------------- - Try again to fix the CRC/SHS compilation problem for gcc 3.XX in bsect.c - Resolve links in verbose bootloader output from boot.c (patch from R. Coker) + extend to RAM disk, message, & bitmap files. Essentially superseded by BUILTIN option. - Fix minor -I bug when change rules repeat in another 'other=' - Implement UNIFY (copy 2nd stage loader, bitmap, and/or message file into the map file). - Implement BUILTIN - first and second stage loaders, chain loaders, and mbr loader is built into the /sbin/lilo executable. No more file incompatibilities. - Fill in bitmap file Location, Color, and Timer parameters from a header in the bitmap file; config file overrides; add utilities on the -E switch to manipulate parameters in the BM file header. - Pass size of 2nd stage loader to 1st stage; probe reflects proper memory size. - Fatal error if any of "lock", "nobd", "vga=", and "kbd=" are in an append= or literal= in the config file. - "optional" now will skip an image if the initrd is not present, just as it will now skip if the kernel is not present. - Eliminate 'start_page' from the image descriptor. - Correct and beautify output from verify_partition in partition.c. - Issue warning when BIOS geometry and kernel geometry differ. - Add '-E' switch for handling bitmap file LILO headers. - Interactive password input is no longer echoed. - Add '-F' flag to override XFS, swap, NTFS partition checks. - DOS paritions will cause boot loader relocation. - Add '-B' flag to specify bitmap file on command line. - Modify bsect.c(bsect_common) to use 'image' flag. - Check for space/control-char in image name, label, alias. - Implement 'large-memory' flag in the prompt variable. - Report change rules (-q) without stopping on 0 offset in PT. Chain Loader ------------ - Now sensitive to command line in ES:DI; will pass it on if there are args after the 'BOOT_IMAGE=xxxxx' prefix. - Limit command line passing to boot sectors having the 'LILO' sig- nature only. (Will miss relocated boot sectors, however.) - Fix 'revmap1' to save SI, so partition change rules are okay. Boot Loader ----------- - First stage now verifies signatures in second stage loader and its index map. - Fix bugs in bitmap display when there is a locked command line and it is interrupted: cmdline clobbered, descr selection, and top line lowlite display. - Bitmap display dynamically computes number of rows in selection menu -- just like the menu interface. - Memory allocation by 1st stage for the 2nd is now variable, rather than fixed at the largest (boot-bmp.b). - Issue "BIOS data check successful/bypassed" message. - First stage loader begins with short jmp, and still allows relocation - 'map_create' checks 'extra' on a RAID installation - Load initrd AFTER the kernel: supports boot protocol 0203h and "mem=" within an append=XXX. "mem=" on command line replaces "mem=" from any append=XXX. - Load sequence: kernel header, initrd (alt. map), kernel proper - "vga=" on command line now allows any radix input; viz., 0xHHHH - With no 'start_page', the high starting address is obtained from the kernel header directly. - Add INITRDLOW compilation switch, and add check for bios that mucks with high byte of 386 address (int 15h, fn 87h). - Only use 32-bit move address with 'large-memory' flag in prompt variable, otherwise sitck with 24-bit address (<15M). - Compensate for buggy BIOS in int 15h, fn E820h call to avoid overlapping memory areas Changes from version 22.1 to 22.2 (05-Feb-2002) John Coffman Boot Installer -------------- - Fix bsect.c compilation problem (l.241) on newer GCC libraries - Add "suppress-boot-time-BIOS-data" flag to config file - Add LVM support patches, courtesy of Andreas Dilger: - Make sure image descriptor is zeroed to start - Fix 'lilo -p' segfault with password=explicit - Fix 'lilo -q' to handle relocated boot sectors on floppies Boot Loader ----------- - Add a video mode set to mbr.S and first.S to accomodate Dell/ Windows XP disabled video on startup - Add mt_flag to KEYTABLE menu area for automatic suppression of bios data collection in case of failure - Vary placement of initrd: (memory <= 64M) ==> load below 15M, whereas (memory > 64M) load just above 64M; use int 15h, fn's E820 & E801 to determine memory size > 64M - DELL_DIRTY_HACK enables video with int 10h, fn=12h, subfn=36h - Shorten read.S by making 1 mov AX into mov AH - Fix first.S pread to use index buffer at 0x7E00, not 0x0200 - Limit BIOS data collection for HD to # drives returned by fn 8, dev 80h (in DL) Chain Loader ------------ - Fix bug in CHANGE / MAP-DRIVE interaction when change is to other than boot drive Utilities --------- - Add a video mode set to disk.S to accomodate Dell/Windows XP disabled video on startup - Add pauses between stages of output to make reading easier - Add "$(OBJS): mylilo.h" dependency to Makefile - Add 'diagnose' directory with version 2 of the disk diagnostic - Add LGPLicence for Robert de Bath's code - Limit diagnostic 2.0 probe for HD to # drives returned by int 13h fn 8, dev 80h (in DL) Changes from version 22.0.2 to 22.1 (31-Oct-2001) John Coffman Utilities --------- - Add version 1.0 of 'mkrescue' Boot Installer -------------- - Support 4 more SCSI controllers & IBM iSeries v.disk. - Add M-Systems Disk-On-Chip devices 62(?) and 93 - Fix bug in 'part_verify' to correct partition mask. - Passwords use SHS (FIPS PUB 180-1) 160-bit hash or 64-bit CRC-32 - RAID1 relocations now check for files within the boot Raid partition. - Correct operation of -I flag; add option "r" (now "i" & "r") - Strengthen "part_verify" to disallow installing on secondary partitions (in addition to primary partitions) other than Linux partitions Boot Loader ----------- - Allow variable number of Descriptor Sectors (DSECS=n) - Load second-stage loader using single sector map segment; removes size constraint on second-stage loader (15->~100 sectors). - First-stage loader avoids BPB area -- doesn't clobber FAT16 -- unless DSECS>5. - RAID1 sector address relocation performed only if flagged. Changes from version 22.0.1 to 22.0.2 (13-Oct-2001) John Coffman Compilation ----------- - Fix 'partition.c' to compile with 2.4.12 kernel headers - Fix compilation bug to allow omission of -DBDATA from Makefile DISK.COM utility ---------------- - Add BIOS data collection VERBOSE diagnostic. Changes from version 22.0 to 22.0.1 (02-Oct-2001) John Coffman Boot Installer -------------- - Fixed password security hole to create 'lilo.conf.crc' with mode 0600 (not 0644). Changes from version 21.7.5 to 22.0 (29-Aug-2001) John Coffman [released 9/27] Boot Installer -------------- - Passwords are now hashed using a CRC-32 checksum. Allows for a full pass-PHRASE - Using password="" (null string) will trigger interactive pass- phrase input; such passphrases persist until -p switch is used to force re-creation of CRC save file: 'lilo.conf.crc' - Password options expanded. Now there are 'mandatory', 're- stricted', and 'bypass', strongest to weakest. 'mandatory' remains the default. - The config file parser now handles garbage input with a good diagnostic, rather than an unexpected parse. - RAID installations now create a single map file, install the boot record on the RAID partition, install auxiliary boot records only on MBRs if needed, except BIOS device 0x80. Back- ward compatibility is possible with new config-file and command line options (raid-extra-boot= or '-x' switch). Even with stored boot command lines ('-R', lock, fallback), RAID set coherency can be maintained. - Add the '-A' switch to activate a partition. Replaces activate.c. - Add the '-M' switch to allow restoration of a Master Boot Record. - Allow 'loader=' in the global section of config file. - Add 'bitmap=' to specify a 640x480x16 bitmap file to be used as a splash screen upon booting. RGB (uncompressed) and RLE (com- pressed) Windows/OS2 bitmaps are supported. - Add 'bmp-table=', 'bmp-colors=', and 'bmp-timer=' to support posi- tioning and color specification for bitmap screens. - Modify 'bmp-X' input routines to allow pixel addressing (in addition to the character addressing). - Use bios data from boot-time to help identify bios device codes. - Add 'geometric' and the '-g' switch to specify sector/head/cylinder disk addressing. - Add LBA32 compile switch, and make it the default: 'lba32' is now assumed, unless 'geometric' or 'linear' is specified. - Raid scans 'raid_disks + spare_disks' - Add HPT370 controller (major device 114) Boot Loader ----------- - os2_d.b may now be obsolete with extensive checking added to chain.b to see if it should fill in bytes 24 & 25 in the boot record - boot-bmp.b generated to display bitmapped boot screen - read.S updated to allow #heads==256 (bios not IBM-compliant) - disk.S updated to 1.4 to account for #heads==256 (hosed bios) - second.S updated to allow for EBDA > 64k Changes from version 21.7.4 to 21.7.5 (26-Apr-2001) John Coffman Boot Installer -------------- - Correct DAC960 partition mask -- again. Chain Loader ------------ - Reverse map device code if "map-drive" is in effect Changes from version 21.7.3 to 21.7.4 (10-Apr-2001) John Coffman Boot Installer -------------- - Issue warning when CHANGE AUTOMATIC is to be inserted. - Correct DAC960 partition mask. Boot Loader ----------- - Fix password timeout security hole which allowed booting with- out entering a password. Changes from version 21.7.1 to 21.7.2 (20-Mar-2001) John Coffman (issued as "patch-21.7.1-to-21.7.2-diff.txt) Boot Installer -------------- - Add several devices supported by the 2.4.2 kernel only - Bugfix for -I switch Changes from version 21.7 to 21.7-1 (08-Mar-2001) John Coffman (issued as "patch-21.7-to-21.7.1-diff.txt") Boot Installer -------------- - Makefile is simplified to remove 'filesize.c' - New devices are added (Compaq), and ide5 is made to work - A new diagnostic is added for when the '-r' switch is used - Raid update for devfs support Changes from version 21.6.1 to 21.7 (24-Feb-2001) John Coffman Boot Installer -------------- - Added code to 'do_cr_auto' to account for 'devfs' specifications - Corrected code for -u/-U switches to make argument optional - Fix for I2O major block device (SCSI raid) - Expanded 'default=' error message - Fix to strip from 'lilo.conf' to accomodate DOS text files - Changed & expanded setup of serial line parameter specifier Boot Loader ----------- - Accepts new serial line parameter and supports higher baud rates Changes from version 21.6 to 21.6.1 (16-Dec-2000) John Coffman Boot Installer -------------- - Bug fix to make '-r' and '-s' swithes work correctly. - Bug fix for automatic change-rules to work correctly. - Re-order some includes for glibc-2.2 compilation. Boot Loader ----------- - Added compile time option 'HP_TTRC' to add a 150ms delay to boot process to accomodate HP TTRC card. Changes from version 21.5.1 to 21.6 (01-Oct-2000) John Coffman License ------- - Corrects license wording problems by issuing all code and documentation under a BSD license. Boot Installer -------------- - Supports booting from Reiser FileSystem 3.6.18 and later, without the need to mount 'notail'. - Added -T diagnostic capability, which includes real-mode bios tests. "make floppy" is still supported for patho- logical installations. - Updated default change-rules. Added "change/automatic" facility, as well as automatic generation of change-rules in the abscence of "change" keyword. Boot Loader ----------- - Dynamically determines where second-stage loader is loaded, thus allowing maximum room for kernel setup.S real-mode code. - First-stage loader no longer relocates itself. Changes from version 21.5 to 21.5.1 (24-Aug-2000) John Coffman Boot Loader ----------- - Perl script keytab-lilo.pl updated for problem static decls - Corrected assertion of DTR/RTS at all serial bitrates Boot Installer -------------- - Fix for RAID segmentation fault if boot= is not specified - Fix for RAID to allow enough characters in expanded names Changes from version 21.4.4 to 21.5 (17-Jul-2000) John Coffman Boot Installer -------------- - Now recognizes the option `table=' to support booting OS/2 or DOS-like systems from a secondary partition. - Supports `menu-title=' and `menu-scheme=' to all customization of the Boot Loader menu-driven user interface (see Boot Loader, below). - Updated man-pages (lilo and lilo.conf) for all new features (and even some older ones). Boot Loader ----------- - Completely new menu-driven user interface. Preserves backward compatibility with command line interface on console or serial terminal. Menu title may be specified in 'lilo.conf'. Menu color scheme may be customized on VGA, but is fixed on MDA. - Passes cmdline to kernel in Setup.S, not bootsect.S, if kernel header is 0x0202 or greater. Uses old bootsect.S method for 0x0201 kernels and earlier - Uses significatly less memory, none above 0x099200, to account for large Extended BIOS Data Areas of up to 27K. Allows for considerable growth in kernel's Setup.S code. - Default compile is without LARGE_EBDA, so zImages up to 512k may be loaded. Chain Loader ------------ - The OS/2 chain loader, `os2_d.b', now correctly sets parameters for booting OS/2 from an extended partition. This requires use of a new form of the `table=' option. DISK.COM utility ---------------- - The .asciz pseudo-op has been removed so that the utility will assemble under earlier versions of the as86 assembler. - Now reports EBDA information. Changes from version 21.4.3 to 21.4.4 (10-Jun-2000) John Coffman Map Installer ------------- - Added a minor RAID patch from Richard Bollinger: 'lilo-21_4_3.also' http://www.elliott-turbo.com/lilo/ - Expand COMPACT/LINEAR warning message to include COMPACT/LBA32 Boot Loader ----------- - LARGE_EBDA option now loads second stage loader at 800:0000, and position of command line is changed; makes room for 512K kernels to be loaded low. - Minor optimizations when ES is reloaded (PUSH/POP) vs (mov thru AX) - Serial line now turns on DTR/RTS at initialization - Minor bugfix in numeric conversion (k/K-suffix) DISK.COM utility ---------------- - The disk.com utility no longer requires 'nasm' to assemble. The source code now makes the diagnostic floppy with "make floppy". Changes from version 21.4.2 to 21.4.3 (06-May-2000) John Coffman Map Installer ------------- - Added RAID patches from 'lilo.raid1.also' from Richard Bollinger http://www.elliott-turbo.com/lilo/lilo.raid1.also Changes from version 21-3 to 21.4.2 (12-Apr-2000) -- John Coffman Boot loader ----------- - bugfix in 'read.S' that disabled the combination 'linear' with 'compact' ( '-l' and '-c' together). - fixed numeric convesions; kernel accepts octal, decimal, and hex, so octal is now recognized by the boot loader. - bugfix patch where ES segment prefix was ommitted (RHL 'second.patch') - bugfix for compilation with 'LARGE_EBDA' option which caused command line passed to the kernel to be truncated at 78 characters Map installer ------------- - RHL6.2 loopdev updates added Changes from version 21 to 21-3 (24-FEB-2000) -- John Coffman ----------------------------- Boot loader ----------- - will boot from disks up to 2048Gb in size, as long as the BIOS allows the Enhanced BIOS calls for 32-bit sector addressing using packet calls. - checks if BIOS supports packet calls (int 0x13, AH=0x42), and uses these calls if 'lba32' was specified. Otherwise, it uses the C:H:S addressing scheme of the original IBM-PC BIOS. - the disk read routine is separated into its own source file, "read.S", which is included in the first-stage, and second-stage loader codes. The first stage loader uses a very stripped down read routine, since it only deals in single sector transfers. - if BIOS does not support 32-bit packet calls, and the cylinder address overflows when the 32-bit address is converted to C:H:S, then a "9f" error code is issued. Map installer ------------- - added the '-L' command line switch and 'lba32' configuration file global option. - map compaction of 'lba32' addresses is supported with the existing '-c' switch (or 'compact' configuration file global option). - floppy disks now will always fall back to C:H:S addressing. - changed the -v option to now accept a single digit to set the verbosity level; e.g., 'lilo -v 5 ...' replaces 'lilo -v -v -v -v -v ...' for maximum diagnostic output. - LILO version information is moved to the file 'version.h', and VERSION is now deleted. This allows for tracking of VERSION_MAJOR (=21) and VERSION_MINOR (=3) for this and future code paths. BIOS tester ----------- - Inspired by 'dparam.com', a much more extensive BIOS test program is included with this version. Called 'disk.com', it was developed under DOS, and requires 'nasm' to be assembled. - DISK.COM will probe the BIOS for disks supported by the BIOS, and report on their CHS geometry. If EDD is supported, the EDD geometry is also reported. If disks with cylinder numbers of 1024 or above are detected, it will issue a recommendation to use LILO with the 'lba32' option. - Creation of the bootable floppy image version of this utility is in- complete at this time. Changes from version 20 to 21 (5-DEC-1998) ----------------------------- Boot loader ----------- - cylinder calculation could overflow when using LINEAR (fix by Jonas Aaberg and an anonymous contributor) - first-stage loader code begins with the byte 0xFA (a CLI instruction). This works around the "INACCESSIBLE_BOOT_DEVICE" blue screen bug of Windows NT 4 (reported by too many people to mention) - new build-time option LARGE_EBDA to load boot loader in the 0x8xxxx area instead of the 0x9xxxx area (disabled by default; problem reported by Josef Moellers) Map installer ------------- - new build-time option USE_TMPDIR to honor TMPDIR when creating temporary devices (disabled by default) - now only 0x1b6 bytes of the boot sector are overwritten, which preserves the passwords DR DOS stores there (fixed by Roy Millar) - -u and -U accidently implied -v - "BIOS drive 0xNN may not be accessible" warning was printed in cases where the drive code was never used (fixed by Andries Brouwer) - change rule for DOS16_big incorrectly used DOS16_small_hidden when hiding (fixed by Anthony Richardson) - RESET in CHANGE-RULES did not remove default rules (fixed by Kurt Garloff) - added support for Mylex DAC960 PCI RAID controllers (by Leonard Zubkoff) - added support for third to sixth IDE interface - build-time option READONLY was not used properly - fixed a few harmless compiler warnings Documentation and installation ------------------------------ - user's guide claimed that partitions are hidden by setting the highest bit in the type (i.e. 0x80). The correct value is 0x10, which is also what is used in the code. - removed useless (and potentially harmful) DEFAULT_PATH from keytab-lilo.pl (fixed by Andries Brouwer) - consistency of build-time options is now checked before build starts - QuickInst has now limited knowledge of multi-disk configurations - doc/Makefile: added targets user.ps and tech.ps - user's guide still claimed that kernels can't be larger than 512 kB (reported by Jean-Albert Ferrez) - weird description of the purpose of option BEEP (reported by Tom Toffoli) Changes from version 19 to 20 (20-JUN-1997) ----------------------------- Boot loader ----------- - now supports 19200 bps and 38400 bps on the serial line (UNTESTED) - when reaching the end of the command line buffer, input is ignored instead of being treated like [Enter] (by Martin Mares) - fixed numerous bugs in patching of heap end pointer in setup.S (by Martin Mares) - images can now optionally be launched with a single keystroke (no [Enter] required) - now supports non-US keyboard layouts Map installer ------------- - DISK sections may now also define non-disk devices, e.g. /dev/ram - increased debug level for the "Caching device ..." message - changed the chain loader format to allow sizes > 512 Bytes - chain loader now supports arbitrary drive mappings (option MAP-DRIVE) - chain loader now supports arbitrary partition table modifications (option CHANGE) - removed the configuration option REWRITE-TABLE - removed the build-time options FIX_TABLE and HIDE_DOS - added the global configuration option CHANGE-RULES plus sub-options RESET, TYPE, NORMAL, and HIDDEN - OTHER sections have new configuration option CHANGE plus sub-options PARTITION, SET, ACTIVATE, and DEACTIVATE - OTHER sections have new configuration option MAP-DRIVE with sub-option TO - now only 0x1b8 bytes of the boot sector are overwritten, which preserves some magic numbers NT stores there - compiles with 2.1 kernels (asm/boot.h problem - reported by many people) - should also compile under 0.93 or such again (required NORMAL_VGA etc., which didn't exist back then) - lilo -q now prints unknown VGA modes also in hex (by Martin Mares) - option SINGLE-KEY to allow single-key activation - -Wno-parentheses is no longer needed - didn't complain if image label was equal to alias - removed some ancient dead code - new option KEYTABLE to specify non-standard keyboard mappings - PS/2 ESDI disk (/dev/eda and /dev/edb) support (by Andrew Kroll) - geometry.c:last_dev now only probes for the first two IDE disks - because chain.b is used for everything anyway, specifying the chain loader when booting from a driver other than the first one is no longer mandatory Documentation and installation ------------------------------ - changed all references to nic.funet.fi to ftp.funet.fi - updated the user's guide and did some restructuring (many changes) - QuickInst no longer puts ramdisk=0 into lilo.conf - QuickInst now consistently checks for LILO >= version 15 - make clean and make spotless now also remove dump.s and dump.b (by Martin Mares) - changed package names from lilo[.part]. to lilo[-part]- for compatibility with sunsite's archive maintenance scripts - new tool keytab-lilo.pl to generate LILO keyboard tables - updated t2a.pl to a version compatible with Perl 5 - READONLY implicitly turns off REWRITE_TABLE Changes from version 18 to 19 (21-MAY-1996) ----------------------------- Boot loader ----------- - new compile-time option to beep after displaying "LILO" Map installer ------------- - common.h broke compilation if CONFIG_BSD_DISKLABEL is enabled - no longer tries to interpret dollar signs and such in comments - check for too many images didn't work (patch by Andries Brouwer) Documentation and installation ------------------------------ - removed some "dead" targets in Makefile - stopped using -N, because recent binutils link statically then - INCOMPAT no longer promises that REWRITE_TABLE will be fixed in version 19 Changes from version 17 to 18 (16-MAY-1996) ----------------------------- Boot loader ----------- - added ability to load data (e.g. kernels) at addresses >= 0x100000 - added support for loading an initial RAM disk - any_*.b became too big when using REWRITE_TABLE - included trimmed sector read function for first.S by Ted Ts'o - now prints spaces before error codes - temporarily removed support for REWRITE_TABLE - added support for heap size indication to kernel setup.S - added compile-time option XL_SECS for extra large disks Map installer ------------- - new option INITRD to load an initial RAM disk - added support for "big" kernels (> 0.5 MB compressed), which are loaded directly at 0x100000 - long quoted strings can now be distributed over several lines using a backslash - environment variables are accessible in lilo.conf with $name or ${name} - now properly identifies attempts to map from NFS and such - refuses to overwrite unsuitable partitions - caches device names and numbers, thereby significantly reducing the number of readdir and stat system calls (typically, the total number of system call decreases by about 80%) - temporarily removed support for REWRITE_TABLE - geometry.c:exists now opens devices read-write in order to avoid reading from CD-ROM devices (patch by Alain Knaff) - added a warning if COMPACT is used with LINEAR Documentation and installation ------------------------------ - documentation, QuickInst, and on-line usage information no longer mention the disktab file (a DISK section should be used instead) - mkdist now uses the VERSION file - distribution now includes .lsm file - LILO is now compiled without -O2 - updated FTP references and rewrote them to conform to RFC1738 Changes from version 16 to 17 (19-DEC-1995) ----------------------------- Boot loader ----------- - changes for FALLBACK and new map section structure (see below) - LCF_READONLY now disables the LOCK option (and FALLBACK too) - added command-line option kbd to preload keyboard buffer - write errors are now reported (Wxx) - chain loaders now support changing the active partition (enabled with REWRITE-TABLE) - chain loader can also "un-hide" a DOS partition if its partition type has been changed by OS/2 BM (build-time option FIX_TYPE) - when enabling HIDE_DOS in addition to FIX_TYPE, DOS partitions (except for the one being booted) are hidden, just like OS/2 BM does (build-time option HIDE_DOS) Map installer ------------- - added FALLBACK option to change default command line before booting the current image - added REWRITE-TABLE option to patch partition table at boot time - added REWRITE_TABLE build-time option to enable REWRITE-TABLE - added DISK section flag INACCESSIBLE to mark disk as inaccessible for the BIOS so that the map installer can refuse bad mappings - options and fallback sectors are now at the beginning of map sections - -q and -R were accidentially marked as optional in usage - fixed incorrect partition check for other = Documentation and installation ------------------------------ - changed LILO version numbers to always be of the form instead of 0. - README now also contains the version number - make install now strips /sbin/lilo instead of trying to strip /sbin - various bug fixes in QuickInst - added file VERSION containing the current version number and new make target version to rename ../lilo to ../lilo- - changed a footnote which yielded an asterisk at the end of a command line in the ASCII README - -q and -R were accidentally marked as optional in command-line descriptions - mentioned -D option in command line description - new section "System overview" in the user's manual and several minor additions - a few minor corrections and addition of unusual error messages - the last traces of "old-style" configuration have been removed Changes from version 15 to 16 (26-FEB-1995) ----------------------------- Boot loader ----------- - added register dump boot sector (dump.S) for debugging - chain loaders now clear BP. This might help in some cases where DOS refused to boot. Map installer ------------- - really fixed -R this time - now suggests to "use a DISK section" (instead of disktab) if HDIO_REQ fails - removed incorrect error message when using a disktab - added check to detect CD-ROMs with major numbers of hard disks - no longer complains about corrupt partition table if 3D address is smaller than linear address and (3D) cylinder is 1023 (OS/2 does is this way) - LOADER is now required when booting an operating system from any device than the first hard or floppy disk - changed header protection macros from _xxx_H_ to xxx_H - added (untested) support for 2nd IDE controller (major 22) Documentation and installation ------------------------------ - user.tex is now compatible with LaTeX 2e (\textfont0 problem) - tech.tex now avoids \SetFigFont (LaTeX 2e again) - /sbin/lilo is now optimized and stripped when installing - ASCIIfied "Booting basics" section - removed all references to the old directory structure - added description of LOCK in config file - updated FD TMC-1680 warning - added reminder to re-run /sbin/lilo when modifying partition tables - updated list of kernel options - added detailed description of >2 disks and >1024 cylinders - added description of putting /boot on a DOS partition - reordered sections in "Installation and updates" - updated tech.tex Changes from version 14 to 15 (23-OCT-1994) ----------------------------- General ------- - upon popular demand, a copyright notice has been added Boot loader ----------- - now also drains the keyboard type-ahead buffer - new command-line option "lock" to make the specified command line the default for the following boots too - default command line execution can now be interrupted in prompt mode too Map installer ------------- - fixed -R arguments handling bug - fixed -P argument handling bug - fixed yet another recursion problem with /dev/fd -> /proc/self/fd - added option -D and configuration variable DEFAULT to specify the default image without changing the oder of entries in /etc/lilo.conf - added configuration variable LOCK to make the specified command line the default for the following boots too - added disk geometry configuration in the general configuration file. /etc/disktab is now considered obsolete. - added option -w and configuration variable NOWARN to disable some warnings - added warning when putting the boot sector on a non-boot disk - added warning for possibly inaccessible devices (e.g. third disk) - added warning for disks/partitions with more than 1024 cylinders - added warnings for bad permissions of the configuration file - fixed handling of floppies in geo_open_boot - removed erroneous call to part_verify when booting other systems from files - added support for variable-size setup segments as supported by kernels >= 1.1.43 - restructured verbosity levels - allowed escaping of backslashes in quoted strings (/etc/lilo.conf) - /sbin/lilo -q -v now displays all settings Documentation and installation ------------------------------ - lots of things have been restructured - many changes to describe the current Linux environment - "new" directory structure is now the default - README is now generated from user.tex by a Perl script - lots of minor corrections and clarifications - added a copyright notice and adapted several comments - QuickInst: updated default kernel names - QuickInst: now runs /sbin/lilo -t before trying to install - doc/Makefile: removed extra "Label(s) may have changed" output - disktab: changed header comment and added second example line - /etc/disktab is no longer automatically created by make install - linking /etc/lilo/install -> /sbin/lilo is no longer suggested - removed mkbindist. I don't think anybody used it anyway. Changes from version 13 to 14 ----------------------------- Map installer ------------- - added a few missing closedirs to device.c:scan_dir - added detection of directory loops to device.c:scan_dir and geometry.c:last_dev - fixed handling of dangling links in /dev - new option -u [ device ] to restore boot sector. Unsafe mode with -U - fixed/improved usage message Documentation and installation ------------------------------ - QuickInst: did not write "other" sections to configuration file - QuickInst.new: improved handling of disks without active partitions - QuickInst.new now knows about /etc/disktab (relict from Shoelace, still in some distributions) - QuickInst.new now uses *_d.b chain loaders when configuring non-Linux systems on the second disk Changes from version 12 to 13 ----------------------------- General ------- - BSS is no longer cleared by LILO, because the kernel itself does that now. - added support for the new directory structure. Makefile and QuickInst come in .old and .new versions. See INCOMPAT for details. - removed support for unstripped kernels. Therefore, mkck is no longer part of the distribution. Boot loader ----------- - added missing seg es override to UI_MAGIC check at "input". Map installer ------------- - new options LITERAL and APPEND. - the root setting is no longer being shown on -q -v - the configuration file may now contain quoted strings in which spaces and equal signs do not have to be escaped. Documentation and installation ------------------------------ - fixed bug in QuickInst that prevented correct renaming of the config file when ROOT is set. - added comment to disktab indicating that it is typically not needed. - distributed files are now readable for group and other. - mkdist is now included in the distribution. - changed the name of kernels from "(traditional) boot image" to "kernel image". - changed the name of the string passed to the kernel from "command line" to "parameter line". - removed obsolescent terms "rootimage" and "bootimage". - fixed documentation bug claiming only kernels can be protected by passwords. - fixed some additional minor documentation errors. Changes from version 11 to 12 ----------------------------- Boot loader ---------- - removed accidential swapping of A:/B: when swapping C:/D: from the chain loader. - added new chain loader any_b.b (swaps A:/B:) - fixed incorrect handling of drive number resetting in swapping versions of the chain loader. - now generates diagnostics when failing to load the second stage loader. - new compile-time option NO1STDIAG to disable these diagnostics. Map installer ------------- - fixed stat/fstat when creating temporary devices. - subdirectories of /dev are now recursively searched for disk devices in addition to /dev - devices are now counted by highest device number, not by name. - some minor fixes. Documentation and installation ------------------------------ - QuickInst now warns if there is an obsolete LILO boot sector on the MBR. - QuickInst is now prepared to handle symbolic links hda -> sda - other minor fixes to QuickInst. - removed all references to compound unstripped kernels from the user's guide. - activate is now compiled as a stripped, statically linked, impure executable. - fixed a few minor omissions in the technical overview. Changes from version 10 to 11 ----------------------------- Boot loader ----------- - added on the fly patching of the BIOS disk parameter table to fix the "Error 0x04" observed on some systems. Map installer ------------- - floppy devices are no longer opened at all when using the UNSAFE option in OTHER. - fixed partition table checking. - new option -V to display the version number. - INSTALL = /etc/lilo/boot.b is now the default if INSTALL is omitted. - new compile-time configuration option NOINSTDEF to restore the old semantics of INSTALL. Documentation and installation ------------------------------ - QuickInst no longer asks whether to change the active partition if installing LILO as the MBR. - QuickInst now suggests configuring other operating systems if installing LILO as the MBR. - added a version check to QuickInst. - added de-installation instructions. - fixed a few minor documentation bugs. - added script mkbindist that generates a minimal binary distribution of LILO. Changes from version 9 to 10 ---------------------------- Boot loader ----------- - added support for read-only setting of root. - new chain loader os2.b to load OS/2 from the second disk. - new chain loader any_d.b to load BIOS-based operating systems (e.g. PC/MS-DOS) from the second disk. Map installer ------------- - removed support for old-style configuration. - removed the dump option -D - removed support for not-compound unstripped kernels. - limited partition checking to hard disks and primary partitions. - -C now accepts - for standard input. - -P now has sub-options "fix" and "ignore". New configuration variable "ignore-table" coresponds to "-P ignore" - added automatic backup of the partition table when fixing it. - new configuration variables "readonly" and "read-write" to change read-only mounting of root. - made partition offset field in /etc/lilo/disktab optional. - added tentative support for XT-type hard disks. - improved some error messages. - some minor fixes. Documentation and installation ------------------------------ - changed many "echo"s in QuickInst to "cat"s. - suggesting using a symbolic link to lilo for /etc/lilo/install. - removed the configuration option NOAUTO. - split the documentation in a user's guide and the technical overview. - removed all references to older versions of LILO, the kernel or other programs. - removed all references to old-style configuration and not-compound unstripped kernels. - using the fullpage style. - removed and "ascified" anew the shared sections of README and the LaTeX documentation. - some minor corrections. Changes from version 8 to 9 --------------------------- Boot sector ----------- - can now get the command line from the map file and overwrite that sector. - passes the word "auto" on the command line if booting after a timeout. - new command-line option vga={ask,normal,ext,extended,} to alter the VGA mode on the fly. - image name matching can now be made case-insensitive (default) - added sanity checks for the second stage loader and the descriptor tables. Map installer ------------- - added new compound unstripped kernel format. - -r is now implied if the environment variable ROOT is set. - new option -I to translate a label name (e.g. obtained from BOOT_IMAGE) to the path of the kernel image. - new variable MESSAGE to define a startup message. - new variable UNSAFE to bypass sanity checks and floppy spin-up when defining other operating systems. - new variable ALIAS to define a second label name. - new variable RESTRICTED to confine password protection to invocations with parameters. - added a missing #include to map.c - fixed the BIOS_MAX_* parameters in lilo.h - removed too restrictive cylinder number check. - new option -R to set/clear the default command line in the map file. - added verification of 3D and linear address equality of partition starts (in the partition table). - suppressed outputting the version string when using -D with -v - "vga=extended" can now be abbreviated to "vga=ext". Documentation and installation ------------------------------ - added a test for broken regexp in sed, grep and egrep to QuickInst. Other minor improvements. - now uses build-time configuration variables in Makefile or /etc/lilo/config.defines - copied section "LILO start messages" from doc.tex to README - removed the description of a floppy test installation from README. (doc.tex never contained that part.) - fixed some minor documentation errors and omissions. - fixed some minor Makefile bugs. - included the LaTeX translations of the FIG files. - moved the "Technical overview" to the end. Changes from version 7 to 8 --------------------------- Boot sector ----------- - now supports password protection for boot images. - fixed occasional omission of delays. - passes the name of the boot image to the kernel, which stores it in the environment variable BOOT_IMAGE. - parameters are now preserved when trying to boot the same image again after a media error. - the command line is preserved on error. - can be operated from a serial line. - made timeout handling interrupt-driven to fix time-wrap problems at midnight. - now clears all bytes after text and data of traditional boot images booted from a file. Map installer ------------- - added detection of missing HDIO_REQ support. - added sanity checking for disk parameters. - fixed BIOS code computation for SCSI disks. - command-line settings can now override /etc/lilo/config - defaults for ROOT, VGA, RAMDISK, PASSWORD and OPTIONAL can be set in the options section. - new option PROMPT to unconditionally enter the boot prompt. - new option TIMEOUT to specify an input timeout. - new flag OPTIONAL to specify that an image can be omitted if it isn't present. - new value CURRENT for ROOT to specify the "current" root device. - special characters are now correctly escaped in dumps. - temporary files are now removed on error. - updated the usage output to reflect the changes since 0.6. - added a missing closedir to device.c Documentation and installation ------------------------------ - wrote a quick installation script. - fixed many small documentation errors. - wrote a README for the doc directory. - added descriptions of the configuration parameters passed in the boot sector and of the kernel's command-line interface. - Makefile now explicitly uses /bin/sh - changed echo \c to echo -n in the Makefile - added ability to print the name of the active partition to activate. Changes from version 6 to 7 --------------------------- Boot sector ----------- - supports video mode and RAM disk size settings. - loads original boot sector to make possible additional settings available. - now uses defaults from the boot sector even if the boot sector has been changed after map creation. Map installer ------------- - new configuration based on /etc/lilo/config - can get SCSI geometry without using /etc/lilo/disktab (doesn't work with 0.98pl6) - removed support for BIOS codes (name:code) - removed support for setting the swap device. - new command-line options: -q, -C and -D Documentation ------------- - updated to cover new-style configuration - extended the plain-ASCII README Changes from version 5 to 6 --------------------------- Boot sector ----------- - added command-line argument passing. - now clears BSS of traditional images too. - chain.b is now more careful about register values when invoking the boot sector of the other OS. - added an interface for externally provided command lines. - added experimental recognition of linear addresses. Map installer ------------- - fixed opening the disktab file. (Using -f didn't work.) - fixed use of BIOS codes for the map file: the tilde is now appended before the BIOS code. - added a chdir("/") when using -r - added more sanity checks. - added generation of linear addresses. Documentation ------------- - removed all references to swap device settings in the kernel because recent kernels don't support that any longer. - added a troubleshooting section. - several minor fixes and improvements. Changes from version 4 to 5 --------------------------- Map installer ------------- - added automatic boot sector backup. - fixed variable block size detection. (Didn't work with the 0.97-pl2 kernel.) - added the chroot (-r) option. - made the partition table part of a foreign OS boot descriptor optional. Documentation and installation ------------------------------ - most of README has moved into doc.tex (LaTeX) - added a utility to activate a partition. - make install now reminds the user to update the map. - dd is now used in a more efficient way in the Makefile. (Fewer subshells, etc.) Changes from version 3 to 4 --------------------------- Boot sector ----------- - added a configurable delay. - added a diagnostic title message. Map installer ------------- - fixed all known include file conflicts. - added support for variable block sizes. (Not used yet.) - added some more sanity checks. - added a tool to determine SCSI disk parameters. Documentation and installation ------------------------------ - extended coverage of SCSI disks. - make install now backs up chain.b and boot.b of any older LILO installation. (To say: your system remains bootable even if you forget to run /etc/lilo/install after the update or if this fails for some reason.) - moved the changes section from README into CHANGES. - a set of pre-compiled executables of lilo, boot.b, chain.b and dparam.com is available too. Changes from version 2 to 3 --------------------------- Boot sector ----------- - can initialize BSS of unstripped kernels. - also accepts [Tab] to show the list of known images. Map installer ------------- - fixed parsing of the root device specification. - fixed setting of the root device when the boot image doesn't define it. - reduced the number of installable images from 19 to 16. (Because the descriptors have grown.) Documentation ------------- - added a booting basics section. - many minor changes. Changes from version 1 to 2 --------------------------- Boot sector ----------- - added command-line editing. - added debugging support (-DDEBUG). - added support for compacted maps. - some cosmetic changes. Map installer ------------- - major rewrite. - files that contain "holes" are now handled properly. - added map compaction. - devices are now created on the fly only if they can't be found in /dev. - improved sanity checking. - can now boot other operating systems. - can now boot unstripped kernel executables. - added support for a disk parameter file. - reduced the number of installable images from 21 to 19. - changed the command-line syntax. - root and boot can now be specified on the command line. Documentation ------------- - many changes, including correction of some minor errors. Changes from version 0 to 1 --------------------------- Boot sector ----------- - tested as master boot record. - improved the boot prompt invocation method. - increased the number of installable images to 21. - added a help facility. - improved read error handling and error reporting in the boot loader. - added a second stage boot loader. Map installer ------------- - fixed some minor bugs in the map installer. Removed all compiler warnings. - added labeling of images. - added version checking for the boot sector. - replaced option -r by -m. -r will be available for a while for compatibility. - added booting from device files (that have boot images written on them). - BIOS device codes can now be specified for boot image files too. - added concatenation of images. (This is a test feature that will be changed in the future.) Documentation ------------- - some minor documentation errors have been corrected. - the README now warns that the map has to be rebuilt after the images are replaced or moved. - added a files, a hints and an examples section.