1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
3 # This file is distributed under the same license as the PACKAGE package.
4 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
9 "Project-Id-Version: PACKAGE VERSION\n"
10 "Report-Msgid-Bugs-To: lilo@packages.debian.org\n"
11 "POT-Creation-Date: 2010-11-19 14:16+0100\n"
12 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
13 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
14 "Language-Team: LANGUAGE <LL@li.org>\n"
17 "Content-Type: text/plain; charset=CHARSET\n"
18 "Content-Transfer-Encoding: 8bit\n"
22 #: ../lilo.templates:1001
23 msgid "LILO configuration"
28 #: ../lilo.templates:1001
30 "It seems to be your first LILO installation. It is absolutely necessary to "
31 "run liloconfig(8) when you complete this process and execute /sbin/lilo "
37 #: ../lilo.templates:1001
38 msgid "LILO won't work if you don't do this."
43 #: ../lilo.templates:2001
44 msgid "Deprecated parameters in LILO configuration"
49 #: ../lilo.templates:2001
51 "Deprecated files have been found on your system. You must update the "
52 "'install=' parameter in your LILO configuration file (/etc/lilo.conf) in "
53 "order to properly upgrade the package."
58 #: ../lilo.templates:2001
59 msgid "The new 'install=' options are:"
64 #: ../lilo.templates:2001
67 " old: install=/boot/boot-bmp.b"
72 #: ../lilo.templates:2001
74 " new: install=text\n"
75 " old: install=/boot/boot-text.b"
80 #: ../lilo.templates:2001
82 " new: install=menu\n"
83 " old: install=/boot/boot-menu.b or boot.b"
88 #: ../lilo.templates:3001
89 msgid "Do you want to add the large-memory option?"
94 #: ../lilo.templates:3001
96 "Usually LILO loads the initrd file into the first 15MB of memory to avoid a "
97 "BIOS limitation with older systems (earlier than 2001 and few systems until "
103 #: ../lilo.templates:3001
105 "With newer kernels the combination of kernel and initrd may not fit into the "
106 "first 15MB of memory. LILO compute the needed size of memory and will "
107 "automatically use the memory above 15MB, too, if there is enough physical "
113 #: ../lilo.templates:3001
115 "If this machine has a recent BIOS without a 15MB limitation and you want to "
116 "use memory above 15MB for all kernels, set the 'large-memory' option."
121 #: ../lilo.templates:4001
122 msgid "Do you want to run /sbin/lilo now?"
127 #: ../lilo.templates:4001
129 "It was detected that it's necessary to run /sbin/lilo in order to update the "
130 "new LILO configuration."
135 #: ../lilo.templates:4001
137 "WARNING: This procedure will write data in your MBR and may overwrite some "
138 "things in that place. If you skip this step, you must run /sbin/lilo before "
139 "reboot your computer or your system may not boot again."
144 #: ../lilo.templates:5001
145 msgid "Do you want to convert boot and root options?"
150 #: ../lilo.templates:5001
152 "Until kernel using the newer disk interface 'libata' you need the newer "
153 "DiskID and/or UUID in your /etc/lilo.conf the for boot and root options. For "
154 "the most modern systems you should use this conversion and then run '/sbin/"
160 #: ../lilo.templates:6001
161 msgid "LILO configuration."
166 #: ../lilo.templates:7001
168 "LILO, the LInux LOader, sets up your system to boot Linux directly from your "
169 "hard disk, without the need for a boot floppy."
174 #: ../lilo.templates:8001
176 "Hmm. I think you're configuring the base filesystem, and I'm therefore "
177 "simply going to exit successfully without trying to actually configure LILO "
178 "properly. If you're not doing that, this is an important bug against "
179 "Debian's lilo package, and should be reported as such..."
184 #: ../lilo.templates:9001
186 "You already have a LILO configuration in the file ${liloconf}. If you want "
187 "to use the new LILO boot menu, please take a look to /usr/share/doc/lilo/"
188 "examples/conf.sample and choose one of the bitmaps located on /boot."
199 #: ../lilo.templates:10001 ../lilo.templates:12001 ../lilo.templates:17001
200 #: ../lilo.templates:18001
206 #: ../lilo.templates:10001
208 "You have an old incompatible lilo configuration file! Read the file /usr/"
209 "share/doc/lilo/INCOMPAT.gz and rerun /sbin/lilo to write the changes to your "
215 #: ../lilo.templates:11001
216 msgid "Install a boot block using your current LILO configuration?"
221 #: ../lilo.templates:12001
223 "Even if lilo runs successfully, see /usr/share/doc/lilo/INCOMPAT.gz for "
224 "changes in the usage of the ${liloconf} file. If needed: edit ${liloconf} "
225 "and rerun '/sbin/lilo -v'"
230 #: ../lilo.templates:13001
231 msgid "The following is the list of the available bitmaps"
240 #: ../lilo.templates:14001 ../lilo.templates:23001 ../lilo.templates:25001
246 #: ../lilo.templates:14001
247 msgid "Correct ${liloconf} manually and rerun /sbin/lilo."
252 #: ../lilo.templates:15001
253 msgid "Wipe out your old LILO configuration and make a new one?"
258 #: ../lilo.templates:16001
259 msgid "No changes made."
264 #: ../lilo.templates:17001
266 "Either your ${fstab} configuration file is missing, or it doesn't contain a "
267 "valid entry for the root filesystem! This generally means that your system "
268 "is very badly broken. Configuration of LILO will be aborted; you should try "
269 "to repair the situation and then run /usr/sbin/liloconfig again to retry the "
270 "configuration process."
275 #: ../lilo.templates:18001
277 "Your ${fstab} configuration file gives device ${device} as the root "
278 "filesystem device. This doesn't look to me like an \"ordinary\" block "
279 "device. Either your fstab is broken and you should fix it, or you are using "
280 "hardware (such as a RAID array) which this simple configuration program does "
286 #: ../lilo.templates:18001
288 "You should either repair the situation or hand-roll your own ${liloconf} "
289 "configuration file; you can then run /usr/sbin/liloconfig again to retry the "
290 "configuration process. Documentation for LILO can be found in /usr/share/doc/"
296 #: ../lilo.templates:19001
297 msgid "Booting from hard disk."
302 #: ../lilo.templates:19001
304 "You must do three things to make the Linux system boot from the hard disk. "
305 "Install a partition boot record, install a master boot record, and set the "
306 "partition active. You'll be asked to perform each of these tasks. You may "
307 "skip any or all of them, and perform them manually later on."
312 #: ../lilo.templates:19001
314 "This will result in Linux being booted by default from the hard disk. If "
315 "your setup is complicated or unusual you should consider writing your own "
316 "customised ${liloconf}. To do this you should exit this configuration "
317 "program and refer to the comprehensive lilo documentation, which can be "
318 "found in /usr/share/doc/lilo/."
323 #: ../lilo.templates:20001
324 msgid "Install a partition boot record to boot Linux from ${device}?"
329 #: ../lilo.templates:21001
330 msgid "Use LBA32 for addressing big disks using new BIOS features?"
335 #: ../lilo.templates:22001
336 msgid "Install a master boot record on ${disk}?"
341 #: ../lilo.templates:22001
343 "A master boot record is required to run the partition boot record. If you "
344 "are already using a boot manager, and want to keep it, answer \"no\" to the "
345 "following question. If you don't know what a boot manager is or whether you "
346 "have one, answer \"yes\"."
351 #: ../lilo.templates:23001
352 msgid "install-mbr failed! Your system may not be bootable."
357 #: ../lilo.templates:24001
358 msgid "Make ${device} the active partition"
363 #: ../lilo.templates:24001
365 "The master boot record will boot the active partition. If you want your "
366 "system to boot another operating system, such as DOS or Windows, by default, "
367 "answer \"no\" to the following question. You may still use your boot manager "
368 "or the master boot record to boot Linux. If you want the system to boot "
369 "Linux by default, answer \"yes\". In this case you could still boot some "
370 "other OS if you know what partition it is on."
375 #: ../lilo.templates:25001
376 msgid "activate failed! Your system may not be bootable."