1 # Translation of Lilo debconf templates to Japanese
2 # This file is distributed under the same license as the Lilo package.
5 # Hideki Yamane <henrich@debian.org>, 2009-2011
9 "Project-Id-Version: lilo 1:23.1-2\n"
10 "Report-Msgid-Bugs-To: lilo@packages.debian.org\n"
11 "POT-Creation-Date: 2011-03-14 15:48+0100\n"
12 "PO-Revision-Date: 2011-04-30 17:26+0900\n"
13 "Last-Translator: Hideki Yamane <henrich@debian.org>\n"
14 "Language-Team: Japanese <debian-japanese@lists.debian.org>\n"
17 "Content-Type: text/plain; charset=UTF-8\n"
18 "Content-Transfer-Encoding: 8bit\n"
22 #: ../lilo.templates:1001
23 msgid "LILO configuration"
28 #: ../lilo.templates:1001
30 "It seems to be your first LILO installation. It is absolutely necessary to "
31 "run liloconfig(8) when you complete this process and execute /sbin/lilo "
34 "LILO のインストールは初めてのようです。このプロセスが終了したら、liloconfig"
35 "(8) を実行し、それから /sbin/lilo を実行することが、絶対に必要です。"
39 #: ../lilo.templates:1001
40 msgid "LILO won't work if you don't do this."
41 msgstr "これを実行しないと LILO は動作しません。"
45 #: ../lilo.templates:2001
46 msgid "Do you want to add the large-memory option?"
47 msgstr "large-memory オプションを追加しますか?"
51 #: ../lilo.templates:2001
53 "Usually LILO loads the initrd file into the first 15MB of memory to avoid a "
54 "BIOS limitation with older systems (earlier than 2001 and few systems until "
57 "通常、LILO は古いシステム (2001 年より前、あるいは 2004 年までの 2,3 のシステ"
58 "ム) での BIOS 制限を回避するため、initrd ファイルを最初の 15MB メモリ内にロー"
63 #: ../lilo.templates:2001
65 "With newer kernels the combination of kernel and initrd may not fit into the "
66 "first 15MB of memory. LILO will compute the needed size of memory and will "
67 "automatically use the memory above 15MB, too, if there is enough physical "
70 "新しいカーネルの場合、カーネルと initrd の組み合わせが最初の 15MB メモリには"
71 "収まらない場合があります。LILO は必要なメモリサイズと比較して、十分な物理メモ"
72 "リがある場合には、15MB より上のメモリを自動的に利用します。"
76 #: ../lilo.templates:2001
78 "If this machine has a recent BIOS without a 15MB limitation and you want to "
79 "use memory above 15MB for all kernels, set the 'large-memory' option."
81 "このマシンが 15MB の制限を持たない最近の BIOS を持っていて、すべてのカーネル"
82 "で15MB 以上のメモリを使いたい場合は、「large-memory」オプションを設定してくだ"
87 #: ../lilo.templates:3001
88 msgid "Do you want to run /sbin/lilo now?"
89 msgstr "すぐに /sbin/lilo を実行しますか?"
93 #: ../lilo.templates:3001
95 "It was detected that it's necessary to run /sbin/lilo in order to activate "
96 "the new LILO configuration."
98 "新しい LILO の設定を有効にするため、/sbin/lilo を実行する必要があります。"
102 #: ../lilo.templates:3001
104 "WARNING: This procedure will write data in your MBR and may overwrite some "
105 "data there. If you skip this step, you must run /sbin/lilo before rebooting "
106 "your computer, or your system may not boot again."
108 "警告: この動作は MBR に書き込みを行うのでそこにあったデータを上書きします。こ"
109 "の手順をスキップした場合、コンピュータを再起動する前に /sbin/lilo を実行する"
110 "必要があります。さもなければシステムは二度と起動しません。"
114 #: ../lilo.templates:4001
115 msgid "Do you want to convert boot and root options?"
116 msgstr "large-memory オプションを追加しますか?"
120 #: ../lilo.templates:4001
122 "Since kernel using the newer disk interface 'libata' you need the newer "
123 "DiskID and/or UUID in your /etc/lilo.conf for the boot and root options. For "
124 "the most modern systems you should use this conversion and then run '/sbin/"
127 "カーネルが新しいディスクインターフェイス「libata」を利用しているので、/etc/"
128 "lilo.conf の boot および root オプションで新しい DiskID あるいは UUID を使う"
129 "必要があります。最近のほとんどのシステムでは、この変更を行なう必要がありま"
130 "す。その場合には、「/sbin/lilo」を実行してください。"